Little Spec: a pocket RF spectrum analyser, designed and built in-house

Little Spec is our own hardware product: a battery-powered RF spectrum analyser with a custom circuit board, enclosure and companion mobile app. Our engineers took it from schematic to finished device, covering every stage of hardware development in-house.

  • PCB design
  • RF engineering
  • Embedded firmware
  • Prototyping
  • Battery power
  • Enclosure design
  • Mobile app
circuit board design
Custom
assembly and test
In-house
powered, USB-C charging
Battery
companion app
Mobile
Close-up of the Little Spec circuit board, showing the Little Spec branding, RF connectors, USB-C port, status LED and test points

About Little Spec

Little Spec is a pocket-sized RF spectrum analyser that shows live radio activity on a phone. It is a Carefully Coded product, developed entirely in-house by our engineering team.

Technology

Custom circuit board with RF inputs, USB-C and battery charging; battery-powered enclosure; companion mobile app. Verified with a vector network analyser and a handheld spectrum analyser.

Circuit board design

We designed the Little Spec circuit board from the ground up. It brings RF inputs, USB-C power and data, battery charging and power regulation, status lighting and user controls together on a compact board carrying the Carefully Coded name.

Test points and a programming header are designed in from the start, so every board can be brought up, debugged and verified quickly on the bench.

The Little Spec circuit board with SMA antenna connector, USB-C port and Carefully Coded branding

The Little Spec board, with SMA antenna input and USB-C.

Three assembled Little Spec circuit boards on an anti-static mat

Assembled boards, ready for bring-up.

Prototyping and bring-up

Boards are assembled and brought up in our workshop. We hand-solder and rework surface-mount components, wire prototypes to test equipment and iterate on the design until every subsystem behaves as it should.

From the bench: assembly, rework and test.

A prototype board wired to test leads on the bench, with a status LED lit

Prototype bring-up with the board wired to test equipment.

RF test and measurement

An RF product is only as good as its measurements. We verify the RF path with a vector network analyser and check live signals against a handheld spectrum analyser, so we know the readings Little Spec shows can be trusted.

As part of our research we also took apart commercial software-defined radio receivers to understand how established designs approach the same problems.

A vector network analyser connected to a device by a blue RF cable

Verifying the RF path with a vector network analyser.

Gloved hands connecting a small board to a handheld spectrum analyser showing a live trace

Cross-checking live signals with a handheld spectrum analyser.

Enclosure and power

Little Spec runs from a rechargeable battery and charges over USB-C. The board, battery and wiring are packaged into a compact enclosure, with a status light showing the device's state at a glance.

Little Spec internals during assembly, with board and battery fitted in the enclosure

Board and battery fitted into the enclosure during assembly.

The finished Little Spec enclosure with its status LED lit

The finished device.

A companion app for live spectrum

Hardware is only half of the product. Little Spec works with a companion mobile app that displays the live radio spectrum and reads out the frequency being measured, turning raw RF data into something anyone can understand.

It is the same end-to-end approach we bring to client projects: circuit board, firmware, enclosure and software, designed together by one team.

The Little Spec phone app showing a live spectrum trace and a frequency readout

Live spectrum and frequency readout in the companion app.

Macro close-up of a USB software-defined radio receiver board, showing its Realtek RTL2832U chip

Research: inside a commercial SDR receiver.

Let’s talk about your project

Tell us what you’re trying to achieve and we’ll help you find the right approach.